Menu
Companion Bed – Duo Impulse 400 low to floor bed
Loading...
Key Facts & Specifications
- 4 Way electric adjustable mesh decking Bed Base, for good air circulation and removeable for cleaning purposes
- Mattress compensation / auto regression technology to eliminate sheering and friction
- Auto contouring function
- Extra foot section manual 10 position adjustability
- Wall hugging high/low mobilising function
- High/Low variation – 25cm low level care-bed for fall prevention up to 82cm (without mattress) adjustment height level for carer access requirements
- 150mm under bed clearance
- Trendelenburg forward and reverse tilt
- Pre-set hand control comfort position
- Pre-set hoist & comfort position
- Lockable hand control – and backlit for night-time use
- Low-voltage system with separated transformer plug for increased safety for occupants and care staff
- Duo locking function – cylinder covered 50mm double castors
- 150mm underbed clearance
- Pre-installed fittings for light fixture / self-help pole / IV pole etc.
- Compatible with specialist mattress systems
- Fold down split mobilising side rail (GS) – bed can have no rails or any number 1-2 split rails on each side
- Companion surround – choose from a large range of high-quality fabrics at no extra cost. Or a wood timber surround to match your existing furniture.
- Load capacity 225kgs.
STANDARDS COMPLIANCE
- DIN EN ISO 13485:2016 A/C 2018 – Medical devices – Quality management systems – Requirements for regulatory purposes (ISO 13485:2016)
- DIN EN 1970:2000 + A1:2007 – Adjustable beds for disabled persons
- DIN EN 60601-2-52:2010 – Particular requirements for basic safety and essential performance of electrically operated medical beds
The specified products were developed, manufactured and tested on the basis of the management system in accordance with:
- DIN EN ISO 9001:2015 certificate no. 73 100 1297
- DIN EN ISO 14001:2015 certificate no. 73 104 1297
Care & Warranty
Please see below for warranty and maintenance information across our Healthcare Bedding range:
WARRANTY INFORMATION
Our range of Malsch beds come with a 5-year warranty on the frame, alongside a 2-year warranty on the motor/electrics. Parts and labour are covered within the warranty. However, for clients outside of metro Perth there will be a labour/transport fee.
PRODUCT CARE & MAINTENANCE
For individual homecare use we recommend general cleaning of your bed frame and surround. Vacuuming the bed mechanisms to reduce dust build-up, and wiping down on a regular basis with a damp cloth and gentle cleaning solution as standard. Any oiling of nuts and bolts should be done with a silicon based oil e.g., WD-40 Specialist Silicone Spray. All purchases will receive a digital instruction manual when you receive delivery of your bed.
For care facilities, a deeper cleaning regime in line with aged care and disability facility standards is recommended. This includes at minimum the above.
SERVICING
We recommend that our customers conduct a service of their bed every 18 months to 2 years. A general bed service & maintenance can be booked within the Perth metropolitan area, with the first half-hour of labour charges at $195 inclusive of minor parts. In the unlikely event that further time is required or other parts are needed, additional cost of $25 per 15 minutes thereafter is applicable and required parts chargeable.
*** Please note, European Bedding abides by Australian Consumer Law, meaning our valued customers are always fully protected at all times. Whilst our products are known for their quality and reliability, we also provide a warranty to protect your purchase and to offer peace of mind.
